Warm Edge spacer bars insulate the edges of a sealed unit and keep the panes of glass apart. Traditionally spacer bars were aluminium, which is highly conductive to heat allowing it to pass through the window.
Warm edge spacer fiberglass composite 16A
The using of top-tip insulation materials, reduces the thermal energy consumption of the traditional aluminum strip. At the same time,the energy saving and environmental protection effect of building doors and windows is improved.
Composite warm edge of the interval, the introduction of international cutting-edge equipment, Warm edge spacer fiberglass composite 16A
and the original into High-end composite materials in one, through the hot and cold co-extrusion
technology will be composite materials(UPVC medical grade) and stainless steel (316 medical
grade) the perfect combination of wall thickness1mm, in the perfect air tightness at
the same time to achieve a more excellent heat insulationcan! Using high-end
insulation materials, reducing the traditional aluminum heat loss,Improve
the energy efficiency of building windows and doors environmental protection effect.
It can be satisfied with any bending angle required during the processing,such as: rectangle, arc etc.
The advantage of edge of the warm edge of the bar Warm edge spacer fiberglass composite 16A
:
fire retardant, anti-condensation, anti-ultraviolet performance
low thermal conductivity achievements of excellent insulation performance
efficient noise and noise reduction performance
beautiful visual effects
green energy saving
Feature of warm edge spacer Warm edge spacer fiberglass composite 16A
:
Hot cold extrusion
Energy saving and environmental
Strong sealing property
Comfortable and beautiful
The specification of warm edge spacer bar:
| Model |
width/mm |
height/mm |
length /m |
packing |
| 6A |
5.5 |
6.8 |
5 |
CTN |
| 9A |
8.5 |
6.8 |
5 |
CTN |
| 12A |
11.5 |
6.8 |
5 |
CTN |
| 14A |
13.5 |
6.8 |
5 |
CTN |
| 15A |
14.5 |
6.8 |
5 |
CTN |
| 16A |
15.5 |
6.8 |
5 |
CTN |
| 18A |
17.5 |
6.8 |
5 |
CTN |
| 19A |
18.5 |
6.8 |
5 |
CTN |
| 20A |
19.5 |
6.8 |
5 |
CTN |
| 24A |
23.5 |
6.8 |
5 |
CTN |
| 27A |
16.5 |
6.8 |
5 |
CTN |
Through the advanced constant temperature heating process, the high-end composite material and stainless steel are processed at the same time, and then cooling the condensation to make the two materials seamless butt, finally in order to form a tight sealing structure of the integral section.
Why choose akefa warm edge spacer?
We guarantee partners approach, when it comes to co-operation. We stick to the rule that both sides should mutually benefit from such co-operation. We are an independent manufacturer and never compete with our customers. We are for You.
We offer top quality products and we are open to creation of new products in order to successfully meet the market demand.
We are open to various forms of co-operation. You may aspire to become our technical and commercial advisor or business partner. You are most welcome to co-operate with us.
What advantages can the Warm edge spacer bar offer?
HIGH THERMOTECHNICAL INDICES
AKEFA spacer is manufactured using the 'warm edge' technology; it improves thermal insulating properties of an insulating glass unit within its edger-of-glass zones, and reduces risk of condensate formation or frost penetration.
ENERGY AND COSTS SAVING
Due to low heat conduction parameters the AKEFA spacer maintains controlled environment inside a facility. That means reduction of costs for heating during a cold period, or cooling during a hot period.
RESISTANCE TO VAPOR PENETRATION
Metallized layer protects from vapor permeability. This feature makes it possible to use AKEFA for manufacturing energy-efficient insulating glass units.
PROVEN RELIABILITY FOR ANY CLIMATE
AKEFA spacer properties are proven by time and extreme temperature conditions (average winter temperature is 30° С (and regularly even - 40° ), and summer temperature is +25-40° С.
WIDE RANGE OF COLOURS
On demand, the AKEFA spacer can be manufactured in any color. One can obtain aesthetic and fantastically attractive solutions fit to the color of a window profile or home decoration, as well as various contrast variants.
WIDE SIZE RANGE
Main sizes of the AKEFA spacer make it possible to manufacture insulating glass units of various width.
HIGH QUALITY
Features and properties of the AKEFA spacers are confirmed by multiple tests and certificates issued by CHINA international institutions.
Audited Supplier 
){kind=link}