Polyester Fiberglass Geotextile fiberglass roofing tissue
Geotextiles and related products have many applications and currently support many civil engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection, coastal engineering and construction site silt fences or geotube. Usually geotextiles are placed at the tension surface to strengthen the soil. Geotextiles are also used for sand dune armoring to protect upland coastal property from storm surge, wave action and flooding. A large sand-filled container (SFC) within the dune system prevents storm erosion from proceeding beyond the SFC. Using a sloped unit rather than a single tube eliminates damaging scour.
Erosion control manuals comment on the effectiveness of sloped, stepped shapes in mitigating shoreline erosion damage from storms. Geotextile sand-filled units provide a "soft" armoring solution for upland property protection. Geotextiles are used as matting to stabilize flow in stream channels and swales.[3][4]
Geotextiles can improve soil strength at a lower cost than conventional soil nailing.[citation needed] In addition, geotextiles allow planting on steep slopes, further securing the slope.
Technical data sheet for NON Woven Geotextile :
Product specifications and performance parameters (ie, National standard GB/T17638-1998) |
| No. |
Item \ Indicator \ specification |
150 |
200 |
100 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
800 |
Remarks |
| 1 |
Mass area ratio deviation,% |
-8 |
-8 |
-8 |
-8 |
-7 |
-7 |
-7 |
-7 |
-6 |
-6 |
-6 |
|
| 2 |
Thickness,mm ≥ |
0.9 |
1.3 |
1.7 |
2.1 |
2.4 |
2.7 |
3.0 |
3.3 |
3.6 |
4.1 |
5.0 |
|
| 3 |
Amplitude, deviation,% |
-0.5 |
|
| 4 |
Breaking strength,KN/m ≥ |
2.5 |
4.5 |
6.5 |
8.0 |
9.5 |
11.0 |
12.5 |
14.0 |
16.0 |
19.0 |
25.0 |
Vertical and horizontal direction |
| 5 |
Elongation at break,% |
25~100 |
| 6 |
CBR bursting strength,KN ≥ |
0.3 |
0.6 |
0.9 |
1.2 |
1.5 |
1.8 |
2.1 |
2.4 |
2.7 |
3.2 |
4.0 |
|
| 7 |
Equivalent aperture,mm |
0.07~0.2 |
|
| 8 |
Vertical permeability coefficient,cm/s |
Kx(10-1 ~10-3 ) |
K=1.0 ~9.9 |
| 9 |
Tear strength,KN≥ |
0.08 |
0.12 |
0.16 |
0.20 |
0.24 |
0.28 |
0.33 |
0.38 |
0.42 |
0.46 |
0.60 |
Vertical and horizontal direction |
| |
|
It 's a new composite fiberglass cracking-resistant material, made of fiber glass and PET fiber by
Special process.
Specification of Polyester Fiberglass Geotextile fiberglass roofing tissue:
Tensile strength: 5kN/m - 8kN/m
Property of Polyester Fiberglass Geotextile fiberglass roofing tissue:
I. Delaying the reflective crack
2. Provide super waterproof layer
3. Could be completely crushed and used for road regeneration
4. No shrink. Fiberglass geotextile has the ability of no deformation and no shrink under high
Temperature construction environment
5. No stretch. Fiberglass geotextile does not stretch deformation during installation prog ress
Application of Polyester Fiberglass Geotextile fiberglass roofing tissue:
I. Cement concrete pavement reconstruction
2. Old road reconstruction and extension project
3. Asphalt concrete surface
4. Municipal road engineering with cover project
5. Semi-rigid base shrinkage crack disposal
6. Bridge deck waterproof layer
| Area |
Application of Geosynthetics |
| Hydraulic |
Lagooning and Water Treatment, Ornamental Ponds, Golf Courses Aquaculture and Desalination Water LagoonsTanks, Reservoirs, Liquid WasteFloating Cover SolutionsDrainage and FiltrationShading Cover Solutions |
| Environment |
Tailing ponds, Leach mining,Landfills,Landfill Capping,Protection against corrosion,Vertical Barriers |
| Civil Works |
Erosion Control, Secondary Containment, Tunnels,Linear and Surface Works,Consolidation of Margins,Soil Reinforcement,Soil Separation. |
| Building |
Parkings,Roofing,Soundproofing building |
FAQ
What is geosynthetics ?
Geosynthetics form a perfect erosion control fabric used extremely widely in civil engineering to stabilize and reinforce slopes and soil under or next to roads, railways, dams, water reservoirs etc.. They can be easily applied which minimizes the time of construction, as well as they limit the resources and materials necessary.
What kinds of geosynthetics we have ?
Non-woven geotextile, geogrids, geocells, GCL, Geomembranes, Geonets, Geocomposites etc .
What is the geosynthetics used for ?
Hydraulic
Lagooning and Water Treatment, Ornamental Ponds, Golf Courses
Aquaculture and Desalination,Water Lagoons,Tanks, Reservoirs, Liquid Waste,Floating Cover Solutions, Drainage and Filtration
Environment
Tailing ponds, Leach mining,Landfills,Landfill Capping,Protection against corrosion,Vertical Barriers
Civil Works
Erosion Control,Secondary Containment,Tunnels,Linear and Surface Works,Consolidation of Margins,Soil Reinforcement,Soil Separation.
Building - Parkings,Roofing,Soundproofing
Audited Supplier 
){kind=link}