| Customization: | Available |
|---|---|
| Color: | White |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Packaging & Delivery of C-Glass Surface Tissue
|
Packaging Detail: |
standard width: 1000mm/1040mm/1270mm, standard length: 300m usually packed in pp bag and then in cartons. Loading quantity is around 75000m2/20ft container or 189000m2/40" container. |
|
Delivery Detail: |
15 days after receipt of down payment |
Specifications of C-Glass Surface Tissue
1. fiberglass surfacing tissue
2.corrosion resistance
3. low binder content
4. good molding properties
5. Lloyd's approved
Introduction of C-Glass Surface Tissue
Fiberglass surface tissue is mainly used in the surface layers of FRP products. There are two types, winding series and hand lay-up series.
Winding series are mainly used on pipe and tank winding process. It can improve the product surface property on corrosion resistance, comprehensive strength, seepage resistance and longer service life.
Hand lay-up series are chiefly used in the products with complicated geometric curve. It has the advantages of good pattern fitness, quick resin permetion. It can raise the intensity and corrosion resistance of products
Characteristics of C-Glass Surface Tissue
Surface felt used in the fiberglass products, good permeability make resin instantly penetrate into, and eliminate the bubble and white stains phenomenon, it good effect for any sexual complex shape of products and mold surface, can cover up the cloth grain, improve surface finish and the permeability, and at the same time enhance interlaminar shear strength and surface toughness, make the products improve corrosion resistance, is manufacture high quality glass fiber reinforced plastic mold and the products of the essential supplies.
|
Application |
Density (g/m2) |
Moisture Content (%) |
Binder Content (%) |
Wetting time (%) |
Tensile Strength MD(N/5CM) |
|
Winding |
20 |
<0.2 |
7 |
<8 |
≥20 |
|
30 |
6 |
<10 |
≥25 |
||
|
50 |
6 |
<16 |
≥40 |
||
|
Hand Lay UP |
30 |
7 |
<10 |
≥20 |
|
|
40 |
6 |
<15 |
≥25 |
||
|
50 |
Product features of C-Glass Surface Tissue
The glass mat for FRP surface has a fiber dispersion, smooth surface, soft hand-feeling, low binder content , fast resin impregnation and good mould obedience which make it most applicable to other FRP molding processes such as press moulding , spray-up, centrufugal rotating moulding.
1 C-glass tissue used in machine or continuous operation paste hand made of fiberglass products (FRP), the plate, the pipeline, groove, cans, yacht, tub products.
2 E-glass fiberglass felt used for thin epoxy after COINS and electrical insulation products.
3 Alkali glass fiber thin felt used in battery of isolation, waterproofing roof, plasterboard is the panel, plastic floor and chemical pipe lined with leakage, corrosion quality materia
Fiberglass roofing tissue is mainly used as the substrate for waterproof roofing materials, such as waterproofing membrane, asphalt shingle, etc. It is characterized by high tensile strength, water & corrosion resistance, dimensional stability, high porosity and easy saturation with bitumen. The longitudinal strength can be improved further by incorporating reinforcements in the machine direction. Roofing products with fiber glass tissue has high strength, excellent uniformity, good weathering performance and resistance to leaking and aging.
Application of Fiberglass roofing tissue:
An ideal substrate material for asphalt roofing rolls and shingles
Act as the lining for roof insulation layers to protect polymer foam insulation from the damaging effect caused by
chemical solvents in bitumen, so as to prolong the lifetime of heat insulation layer.
Technical Data of Fiberglass roofing tissue: Fiberglass Battery Separator Tissue Mat
|
Item |
Area Weight |
Yarn Space |
Tensile Strength (MD / CMD) |
Roll Size |
Loading Quantity |
|
Unit |
g/m2 |
mm |
N/5cm |
m x m |
M2/40FCL |
|
Specification |
45 |
15 / 30 |
180 / 50 |
1.0 x 3600 |
144000 |
|
50 |
15 / 30 |
230 / 80 |
1.0 x 3300 |
132000 |
|
|
55 |
15 / 30 |
250 / 90 |
1.0 x 2900 |
116000 |
|
|
60 |
15 / 30 |
250 / 110 |
1.0 x 2600 |
104000 |
|
|
90 |
- |
400 / 200 |
1.0 x 1600 |
64000 |
|
|
100 |
- |
430 / 220 |
1.0 x 1300 |
52000 |
Product Description:
It is mainly used as substrates for water-proof roofing materials. It has the good character of high tensile strength, corrosion
Product name: roofing fiberglass tissue
Application: mainly used as substrates for water-proof roofing materials.
weight: 40g/m2;45g/m2 ; 50g/m2
Roll length: 1m*50m ; 1m*25m ; max roll length: 3000m; or according to requirement
Roll width: 1000mm
Packing: plastic film
Loading capacity for 40'container: around 100 000m2
Technical Specification: Glass Fiber Chopped Strand Mat
|
Item |
Value |
|
Weight |
43 g/m2 |
|
Binder content |
22-24% |
|
Thickness |
≥0.28mm |
|
Tensile MD |
≥100N/5cm |
|
Tensile CMD |
≥80N/5cm |
|
Wet strength MD |
≥60N/5cm |
Item |
Area Weight |
Yarn Space |
Tensile Strength (MD / CMD) |
Roll Size |
Loading Quantity |
Unit |
g/m2 |
mm |
N/5cm |
m x m |
M2/40FCL |
Specification |
45 |
15 / 30 |
180 / 50 |
1.0 x 3600 |
144000 |
50 |
15 / 30 |
230 / 80 |
1.0 x 3300 |
132000 |
|
55 |
15 / 30 |
250 / 90 |
1.0 x 2900 |
116000 |
|
60 |
15 / 30 |
250 / 110 |
1.0 x 2600 |
104000 |
|
90 |
- |
400 / 200 |
1.0 x 1600 |
64000 |
|
100 |
- |
430 / 220 |
1.0 x 1300 |
52000 |
){kind=link}